Lubrication & Service - Section 40 OM4036 Page 40-6 10 HOUR (DAILY) INSPECTION (Continued) 13. 14. Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS FUEL FILTERS (Fuel Separators) - Drain water from the bottom drain valve on each fuel separator. AUTOMATIC LUBE SYSTEM - • Check the grease reservoir; fill as required. Lube Key “D”. • When filling the reservoir, check the grease filter indicator. Clean or replace the grease filter if the indicator detects a problem. • Inspect the system and check for proper operation.
Be certain the following important areas are receiving adequate amounts of grease. Lube Key “D”. Steering Linkage Final Drive Pivot Pin - Rear Suspension Pin Joints - Upper & Lower Body Hinge Pins - Hoist Cylinders Pins - Upper & Lower Anti-sway Bar - Both Ends