OM2030 Precautions With High Temperature Fluids Immediately after machine operation, engine coolant, engine oil, and hydraulic oil are at high temperatures and are pressurized. If the cap is removed, the fluids drained, the filters are replaced, etc., there is danger of serious burns. Allow heat and pressure to dissipate before performing such tasks and follow proper procedures as outlined in the service manual. To prevent hot coolant from spraying: 1) Stop the engine. 2) Wait for the coolant temperature to decrease. 3) Depress the pressure release button on the cap to vent cooling system pressure. 4) Turn the radiator cap slowly to release the pressure before removing.
To prevent hot engine oil spray: 1) Stop the engine. 2) Wait for the oil temperature to cool down. 3) Turn the cap slowly to release the pressure before removing the cap. Asbestos Dust Hazard Prevention Asbestos dust is hazardous to your health when inhaled. If you handle materials containing asbestos fibers, follow the guidelines below: Never use compressed air for cleaning. Use water for cleaning to control dust. Operate the machine or perform tasks with the wind to your back, whenever possible. Use an approved respirator when necessary.
Prevention Of Injury By Work Equipment Never enter or put your hand, arm or any other part of your body between movable parts such as the dump body, chassis or cylinders. If the work equipment is operated, clearances will change and may lead to serious bodily injury or death. Fire Extinguisher And First Aid Kit Ensure fire extinguishers are accessible and proper usage techniques are known. Provide a first aid kit at the storage point. Know what to do in the event of a fire. Keep the phone numbers of persons you should contact in case of an emergency on hand. Safety - Section 20 Page 20-3 a , f .
g t high temperatures and etc., there is danger of ollow proper procedures parts such as the dump and may lead to serious