OM2030 Warning Tag Proper Tools installed. Safety - Section 20 Page 20-11 N C S FOR MAINTENANCE E e engine or operating the controls while others are performing ce on the truck can lead to serious injurty and/or death. ach the warning tag to the control lever in the operator's cab to s that you are working on the machine. Attach additional warning d the machine, if necessary. are available from your Komatsu distributor. g part number (09963-03000) ools suited to the task. Using damaged, low quality, faulty, or tools could cause personal injury. Engine Before Service orming inspections or maintenance, stop the machine on firm flat ground, lower the dump body, stop and apply the parking brake.
ne must be run during service, such as when cleaning the radiator, always move the shift control e NEUTRAL (N) position and apply the parking brake. Always perform this work with two people. n must sit in the operator's seat to stop the engine if necessary. Never move any controls not related at hand during these situations. icing the machine, use care not to touch any moving parts. Never wear loose clothing or jewelry. blocks under the wheels to prevent machine movement. orming service with the dump body raised, always place the dump lever in the HOLD position, and ock (if equipped). Install the body-up safety pins or cable securely.
Dump Body sonnel are required to perform mainte- vehicle with the dump body in the raised body-up retention cable MUST be he dump body in the up position, raise the 's maximum height. cable (3) from its stored position on the install between rear body ear (1) and axle ar (4). e cable clevis pins with cotter pins. e cable to stored position (2) after mainte- complete. engine or operating the controls while others are performing e on the truck can lead to serious injurty and/or death. ch the warning tag to the control lever in the operator's cab to that you are working on the machine. Attach additional warning the machine, if necessary. are available from your Komatsu distributor.
part number (09963-03000) ols suited to the task. Using damaged, low quality, faulty, or ols could cause personal injury. ngine Before Service rming inspections or maintenance, stop the machine on firm flat ground, lower the dump body, stop nd apply the parking brake. e must be run during service, such as when cleaning the radiator, always move the shift control NEUTRAL (N) position and apply the parking brake. Always perform this work with two people. must sit in the operator's seat to stop the engine if necessary. Never move any controls not related t hand during these situations. ing the machine, use care not to touch any moving parts. Never wear loose clothing or jewelry.
ocks under the wheels to prevent machine movement. rming service with the dump body raised, always place the dump lever in the HOLD position, and ck (if equipped). Install the body-up safety pins or cable securely. ump Body onnel are required to perform mainte- ehicle with the dump body in the raised body-up retention cable MUST be e dump body in the up position, raise the maximum height. able (3) from its stored position on the install between rear body ear (1) and axle r (4). cable clevis pins with cotter pins. cable to stored position (2) after mainte- omplete. ls while others are performing s injurty and/or death. ol lever in the operator's cab to hine.
Attach additional warning distributor. while others are performing injurty and/or death. lever in the operator's cab to ine. Attach additional warning istributor.