Komatsu — CHECK BEFORE STARTING ENGINE

OPERATION OPERATION I 6. If the oil level is correct, tighten the oil filler cap securely and close the engine hood. REMARK When checking the oil level after the engine has been oper- ated, wait for at least 15 minutes after stopping the engine before checking. If the machine is at an angle, make it horizontal before checking. CHECK FUEL LEVEL, ADD FUEL a WARNING When adding fuel, never let the fuel overflow. This may cause a fire. If spilling fuel, thoroughly clean up any spillage. 1. Use sight gauge (G) on the front face of the fuel tank to check that the tank is full. 2. If the fuel level is not within the sight gauge, add fuel through filler port (F) while watching sight gauge (G).

Fuel capacity: 340 I For details of the fuel to use, see “USE OF FUEL, COOL- PERATURE” on page 165. ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- 3. After adding fuel, tighten the cap securely. REMARK If breather holes a on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the holes from time to time. 94