. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS REMARK Regardless of the ambient temperature, it is possible to start the position preheating 30 off in starting 10 to -10 ° C (50 to 14 ° F) Change 0 to 20 below -10 ° C (14 ° F) 20 3 - 135 engine prehea ting manually. 1. Turn the key in starting switch (3) to t (A). The pr starts. (Preheating at the left po 2. The prehe seconds af ter preheating starts ly 10 seconds. eheating monitor goes of approximate 3. After the pr switch (3) to START position (C).
Th e engine will star If t he engine c annot be started with the above procedure , wait at least 2 minu tes, then start again from Turbo protect fu nction The turbo prot ect function is a function t o protect the turbocharger by kee ping the engine speed at less than 1000 rpm immediate ly after the engine is star ted. tuated, the engine speed is held at less than 1000 rpm, regardless of the When the tu rbo protect function is ac position of t he fuel control dial. When the tu rbo protect function is actu ated, the engine speed is held at le ss than 1000 rpm, even i f the fuel control dial is opera ted.
When the tu rbo protect function is can celed, the engine spee d is set to th e speed for the position o f the fuel control dial. The relation turbo protec t function and the tempera ture of the engin is as shown