Komatsu — LOADING AND UNLOADING WITH TRAILER

. OPERATION TRANSPORTATION Unloading bending. speed selector switch to low speed travel (Lo speed selector switch (5) to switch the travel speed. The travel speed (Lo, Mi, Hi) is displayed on the travel speed monitor (6). 3 - 184 1. Load and unl oad on firm level groun d only. Mainta in a sa fe distance from the edge of 2. Apply the trai ler brakes securely, the n put blocks (1 ) unde r the tires to preve nt the trailer from movin Set left a nd right ramps (2) par aced to the left and right of center (3) o f the tr ailer. e of installation (4) a ma ximum of 15 degree s. If bend a large amount under the we ight o f the put blocks under the ra mps to prevent them from 3.

Remove the chains and wire ropes f astening the m achin 4. Start the engi ne. gine up fully. ever to FREE position (F). Warm the en 5. Set the lock l ever to FREE position ( 6. lamp lights u Press trav 7. Turn auto-de control dial to celeration switch (7) O set the engine speed t FF and operate the fuel o low idle. Each time switches O When aut auto-decel Each time auto-deceleration sw itch (7) is pressed, it n. (7) is turned OFF, the out. FF J ON J OFF in tur When aut o-deceleration switch eration monitor (8) goes