. MAINTENANCE TIGHTENING TORQUE SPECIFICATIONS TIGHTENING TORQUE SPECIFICATIONS TIGHTENING TORQUE LIST CAUTION lbft 8.7 to 10.8 20.3 to 25.3 43.4 to 54.2 72.3 to 90.4 112.1 to 141 170.0 to 213.4 238.7 to 296.6 336.3 to 419.5 452.1 to 564.2 578.6 to 723.3 853.5 to 1063.3 1121.1 to 1410.4 1446.6 to 1808.3 1808.3 to 2242.2 2133.7 to 2676.2 Apply the following table for Hydraulic Hose. 25.3 to 47.0 lbft 39.8 to 68.7 43.4 to 72.3 61.5 to 97.6 94.0 to 137.4 4 - 13 If nuts, bolts, o r othe r parts are not tightened to the specified torque, i t wil l cause looseness or dam age to the tightened parts, and this wil l cause failur e of t he ma chine or problems with o peration.
Always pay careful attention w hen tightening parts Unles s otherwise specified, tighten the metric nut s and bolts to t he torque shown in the table below. If it is necessary t o replace a ny nut or bolt, always u se a Komatsu genuine part of the sa me size as the part that was replaced.
Thread diamete of bolt (a)(mm) Width r across flats (b)(mm) kgm lbft Nm kgm 6 8 10 12 14 10 13 17 19 22 13.2 31 66 113 172 1.35 3.2 6.7 11.5 17.5 9.8 23.1 48.5 83.2 126.6 11.8 to 14.7 27 to 34 59 to 74 98 to 123 153 to 190 1.2 to 1.5 2.8 to 3.5 6.0 to 7.5 10.0 to 12.5 15.5 to 19.5 16 18 20 22 24 24 27 30 32 36 260 360 510 688 883 26.5 37 52.3 70.3 90 191.7 267.6 378.3 508.5 651 235 to 285 320 to 400 455 to 565 610 to 765 785 to 980 23.5 to 29.5 33.0 to 41.0 46.5 to 58.0 62.5 to 78.0 80.0 to 100.0 27 30 33 36 39 41 46 50 55 60 1295 1720 2210 2750 3280 132.5 175.0 225.0 280.0 335.0 958.4 1265.8 1627.4 2025.2 2423.1 1150 to 1440 1520 to 1910 1960 to 2450 2450 to 3040 2890 to 3630 118.0 to 147.0 155.0 to 195.0 200.0 to 250.0 250.0 to 310.0 295.0 to 370.0 Hose nomi nal num ber Width across flat a (mm) Target valve Nm kgm lbft Nm kgm 02 19 44 4.5 32.5 35 to 54 3.5 to 5.5 03 22 74 7.5 54.2 54 to 93 5.5 to 9.5 24 78 8.0 57.9 59 to 98 6.0 to 10.0 04 27 103 10.5 75.9 84 to 132 8.5 to 13.5 05 32 157 16.0 115.7 128 to 186 13.0 to 19.0 06 36 216 22.0 159.1 177 to 245 18.0 to 25.0