. MAINTENANCE MAINTENANCE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING Checking monitor (1) of the monitor panel flashes, 4 - 21 When usi ng compresse d air, there is danger of dirt flying and causing personal i Always w ear protective glasses, dust mask, or other protective equipment. When rem oving the out er element from the air cl eaner body, it is dangerous to pull it out by force. When w orking in high pl aces or where t he foothold i s poor, be careful not to fall because of the r eaction w hen pulling out the outer el NOTICE ean the air cleaner element until the air cleaner clogging monitor on the monitor panel light up.
If the element is Do not cl ean the air cl eaner element until the air cleaner clogging monitor on t up. If the eleme nt is cleaned fr equently befo re the air cleaner cloggi ng monitor light up, the air c leane r will not be able to dis play its performance fully, and the cleaning efficiency will also go do wn. dirt stuck to the element will fall inside the inner element. In additio n, during the cleaning operation, more dirt stuck to the element wil l fall inside the inner elemen If i nspecti on, cleaning, or maintenance is carrie d out with the engin e runnin g, dir t will enter the engine a nd cause dama ge to the engin e. Always sto p the engine before carry ing out these operations.
If air clean clean the a ir cleaner el Replacing element, O-ring Replace element, O If the ele ment has b een used for 1 year, o r air cleaner clogging monitor (1) on the m onitor panel lights up after the element h as been cle aned, repla ce outer element (5), i nner element (6), a nd O-ring ( 8). g evacuator valve evacuator valve (4) if it is damaged or if the rubber is y deformed. Replacin g evacuato Replace evacuator valve (4) if it is damag ed or if the rubbe markedl y deformed.