. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT top of the hydraulic tank to 6 - 12 4. Set the lock lever to LOCK positi 5. Loosen slowly oil filler cap (F) o eliminat e the internal pressure in 6. Place a container under the filter element to catch the oil. 7. Set a co ntainer in position to catc h the drained oil, then remove plug (3) and drain the oil accumu lated in filter case (1). c oil temperature has gone 8. After ch ecking that the hydrauli c oil temperature has gone down, t urn filter case (1) to the left, remove it, then take out (2). e removed parts, then install new element (2). out element 9.
Clean th e removed parts, then in Elem Set d hole head Elem ent (2) must be installed f acing in the correct direction. irection Y with the holes in it facing up, and insert the in element (2) on the protruding portion inside filter (6). ilter 10. Install n ew O-ring (4) to filter case (1), then screw filter case (1) into filte r head (6). When the top of filter case (1) comes into contact with the filter head, tighte n it at least a further 1/2 turns. 11. Clean p lug (3), then fit a new O-r ing (5) to plug (3). m m, 20.3 to 43.4 lbft) 12. Install p lug (3) to filter case (1). Tightening torque: 27.4 to 58.8 N (2.8 to 6.0 kg Tightening torque: 27.4 to 58.8 N