. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT When working mode selector switch (1) is pressed, the screen switches to the working mode selection screen. If switch F5 is pressed, the screen returns to the working mode selection screen without changing to the breaker mode. If a slide arm or other special attachment is installed and the mode is switched to the breaker mode by mistake, it may lead to serious danger, such as the work equipment suddenly dropping. 6 - 20 If the working mode p ilot monitor does not displ ay B for the breaker mode, press workin g mode selector switch (1) and set to the ows. the breaker mode as foll 1.
Press working m ode selector switch (1) or press switches F3 or F4 to select br eaker mode B. de B highlighted in yellow, do one of the pt the selection. mode selector switch (1) pressed. 6. for 5 seconds. 2. With breaker mo following to acce Keep working Press switch F Leave as it is 3. If the breaker mo de is selected, "Really Set Break er Mode? " is displayed on the switch F6. screen. To set to the breaker mode, press mode Precautions when using p valve is at the FREE position. rking mode is B mode. path of the oil, see "HYDRAULIC CIRCUIT (PAGE 6-8)". Check that the sto p valve is at the FREE p osition. Check that the wo rking mode is B mode.
For details of the path of the oil, see "HYDRAULIC CIRCUI T (PAGE Consult the manuf acturer of the breaker to d ecide if an a ccumulator f or the breaker circuit should be installed on your machine. For other precauti ons when handling the br eaker, follo w the instruction manual from the breaker manufacturer and use the break er correctly. The deterioration o f the hydraulic oil when u sing the breaker i s much f aster than for normal operations, so reduce the maintenance i nterval for the hydraulic o il and e lement. For details, see "M AINTENANCE INTERV AL FOR HYDRAULIC BREAKER (PAGE 4-1