Komatsu — ATTACHMENT COMBINATIONS

. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE *1: Equipped with side cutter. *2: It is available only during loading. 6 - 25 PC220 , 220LC This ta ble l ists th e combinatio n of a ttachments which can be installed to the standard arm , long arm and s hort arm. {: : Can be used U Ca n be used only fo r light duty work ¯: Cannot be used NOTICE When th e boom is f ully l owered d uring oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. Categories of us For general digging: Digging o r loading sand, g ravel, clay etc. For light duty digging : Digging or lo ading dry, u ncaked earth and sand, mud etc. For loading work :

Loading dry , loos e eart h and sand For digging or loading hard soil o r soft r ock, i t is recommended that the strengthened b ucket with high durability and high wear resistance b e employed .

Name of bucket Capacity m3 (cu.yd) Outside width mm (ft in) Use Standard arm 3.2 m (10 ft 6 in) Long arm 3.5 m (11 ft 6 in) Short arm 2.5 m (8 ft 2 in) Short arm 2.0 m (6 ft 7 in) (*1) Narrow bucket 0.72 (0.94) 900 (2' 11") Narrow digging { { { { (*1) Standard bucket 1.0 (1.3) 1,260 (4' 2") General digging { U (*2) { { (*1) Light duty bucket 1.14 (1.5) 1,300 (4' 3") Light duty digging U ¯ U U Light duty bucket 1.26 (1.6) 1,400 (4' 7") Loading U ¯ U U Slope finishing bucket 0.40 (0.52) - For triming of a slope and rolling compaction { { { { Trapezoidal bucket (Variable slope type) 0.55 (0.72) - Trapezoidal shaped diching { { { { Ripper bucket 0.61 (0.80) 950 (3' 1") Digging rocks { { { { Clamshell bucket 0.66 (0.86) 866 (2' 11") Ditching, loading { { { { Ditch cleaning bucket 0.80 (1.05) 1,800 (5' 11") Ditching, cleaning { { { { One tooth ripper - - Digging, removing rocks { ¯ { { Three teeth ripper - - Digging, removing rocks - ¯ { {