. OPERATION DETAILED CONTROLS AND GAUGES Travel Speed Selector Switch WARNING Hi lights up : Hi-speed travel When the engine is started, the speed is automatically set to Lo. Each time that the switch is pressed, the display changes Lo J Mi J Hi J Lo in turn. (high-speed) or Mi (mid-range speed). 3 - 31 When loading or u nloading from a trailer, al ways travel at low speed (with travel speed selector switch (3) at the Lo position). Never operate tra vel speed selector switch ( 3) while loading or unloading.
I f the travel speed is switched between Hi a nd Lo when the machine is traveling, the machine may dev iate to one side, even when traveling in Stop the machine before switching the trave Switch (3) is used to set the travel speed Lo Mi speed (Mi), when power is needed, traveling on soft grou the system automatic nd or uphill, a nd travel ally shifts dow n to low speed travel (Lo). There is no need to op erate the switc h. In this case, the pilot mon itor on the monitor displ ay stays lighte d up at Hi REMARK Each time travel sp eed selector switch (3) is switched, the mode is displayed on the m returns to the stan onitor display, and after 2 seconds, the screen dard screen.