Komatsu — 17. GUIDES TO MAINTENANCE

MAINTENANCE Welding instructions: + Turn off the engine starting switch and master switch. + Do not apply more than 200 V continuously. + Connect the ground cable within 1 m (3.28 ft) from the area to be welded. + Avoid seals or bearings from being between the area to be welded and the position of grounding point. Fire prevention: + Use nonflammable cleaner or light oil for cleaning parts. Keep flame or lit cigarette away from light oil. Clamp faces: + When o-rings or gaskets are removed, clean the clamp faces and replace the o-rings and gaskets with new ones. Be sure to fit o-rings and gaskets when assembling. Objects in your pockets:

+ Keep your pockets free of loose objects which can fall out and drop into the machinery; especially when you work on the machinery while bending over it. Checking undercarriage: + When working in rocky areas, check for damage to the undercarriage and for looseness, flaws, wear and damage in bolts and nuts. Loosen the track tension a little when working in such areas. Cleaning machine: + Do not splash water over the electrical equipment. + Do not direct a high-pressure jet directly at the radiator. + Before starting work in mud, rain, snow or at seashore, check plugs and valves for tightness. Wash the machine immediately after the work to protect components from rusting.

Pre- and post-work checks: + Lubricate components more frequently than usual. Be sure to lubricate work equipment pins daily if they are submerged in water. When working at dusty work sites, do as follows: + Check the air cleaner for clogging more frequently. Clean the air cleaner at shorter intervals than specified. + Clean the radiator core frequently to avoid clogging. + Clean and replace the fuel filter frequently. + Clean electrical components, especially the starting motor and alternator, to avoid accumulation of dust. Avoid mixing oils: + Never mix oils of different brands.

If you have only oil which is a different brand from the one that is used in the machine, do not add it but replace all the oil. 3-3