Komatsu — 20.1.1 D32E-1, D32P-1, D38E-1 OR D38P-1

MAINTENANCE 20. USE OF FUEL COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE 20.1 PROPER SELECTION OF FUEL, COOLANT AND LUBRICANT It is not our policy to approve lubricants or to guarantee oil performance in service. The responsibility of quality of the lubricant must remain with the supplier of the lubricant. When in doubt consult your Komatsu distributor. The lubricants specified for this machine are shown below. 20.1 .I D32E-1, D32P-1, D38E-1 OR D38P-1 AMBIENT TEMPERATURE RESERVOIR rYPE 'C -34 -29 -23 -18 -12 -7 -1 4 10 16 21 27 32 38 43 49 "C 'F -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100110120"1:

CAPACITY Crankcase with filter change E01 9.5 e (2.5 gal) -lDTF Front idler (rebuilt) 0.35 e (12 02) E& Track roller (rebuilt) iDTF 0.35 e (12 oz) E& iDTF Top idler (rebuilt) E& 0.1 e (4 oz) Final drive MPL 9.5 !? (2.5 gal) Drive train % iDTF 79.5 e (21 gal) Equipment system # IDTF a zo2 @ 51.1 e (13.5 gal) Fuel tank DF 146 e (38.5 gal) Cooling system * See 20.2 COOLING SYSTEM on page 3-11. 26.5 e (7 gal) % Drive train consists of the rear main frame, steering drive, transmission, torque converter, oil cooler and all appropriate lines. SAE 5W-30 may be substituted. # Capacity may very depending on hydraulic equipment mounted on machine. 8 For service only, HTF may be substituted. 3-8