Komatsu — 24.3.9 PERFORM GROUND LEVEL INSPECTION

MAINTENANCE 24.3.8 CHECK BRAKE PEDAL TRAVEL Check Brake and Decelerator Pedal Travel 1. Measure the pedal (1) free height (A) from the floor plate; 137 mm (5.4 in). 2. When this value exceeds this amount, or the brake fails to work, refer to your Komatsu distributor. Check Secondary Brake Pedal Travel 1. Depress secondary brake pedal (2) all the way until it stops. 2. Measure the pedal travel from fully depressed position 0 to the fully released position (B); 38 mm (1.5 in). 3. When this value exceeds this amount, or the brake fails to work, refer to your Komatsu distributor. 24.3.9 PERFORM GROUND LEVEL INSPECTION Dirt, oil or fuel around the parts of the engine which reach machine.

Check carefully, and if any abnormality is found, always repair it or contact your Komatsu distributor. Before starting the engine, look around the machine and under the machine to check for loose nut or bolts, or leakage of oil, fuel, or coolant, and check the condition of the work equipment and hydraulic system. Check also for loose wiring, play, and collection of dust at places which reach high temperatures. 1. Check for Damage, Wear, And/or Play in Work Equipment, Cylinders, Linkage, Hoses. Check that there are no cracks, excessive wear, or play in the work equipment, cylinders, linkage, or hoses. If any abnormality is found, repair it. 2. Remove Dirt from Around Engine, Radiator.

Check that there is no dirt accumulated around the engine or radiator. If any dirt is found, remove it. 3. Check for Leakage of Water or Oil Around Engine. Check that there is no leakage of oil from the engine or leakage of water from the cooling system. If any abnormality is found, repair it. 3-34