OPERATION 3. Place the transmission steering lever in NEUTRAL. 4. Place the safety lock lever in the ON, locked, (downward) position. 5. Operate the engine at one half speed (no load) for three to five minutes, then move the engine speed control lever to the low idle position. REMARK Serious damage can result to the engine and turbocharger (if equipped) if this cool down step is neglected. 6. Depress and lock the brake and decelerator pedal. 7. Move the engine speed lever fully forward. 8. Turn the key switch to the off position. 9. Remove the key from the starting switch.
12.14 CHECK AFTER STOPPING ENGINE Walk around the machine and check the work eauioment and undercarriage, and check also for leakage of oil or water. If any abnormalities are found, repair them. I. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud stuck to the undercarriage. 2-50