Komatsu — 13.2 PRECAUTIONS FOR LOADING

13. TRANSPORTATION When transporting the machine, observe all related laws and regulations, and be careful to assure safety. 13.1 LOADING, UNLOADING WORK a WARNING Make sure the ramp has sufficient width, length and thickness to enable the machine to be safely loaded and unloaded. If the ramp sags appreciably, reinforce it properly. When loading and unloading the machine, park the trailer on a flat firm roadbed. Keep a fairly long distance be- tween the road shoulder and the machine. Remove the mud from the undercarriage to prevent the machine from slipping to the side on slopes. Be sure the ramp surface is clean and free of grease, oil, ice and loose materials.

Never change the direction of travel when on the ramps. If it is necessary to change direction, drive off the ramps and correct the direction, then drive on to the ramps again. When loading or unloading, always use ramps or a platform and carry out the operations as follows. CORRECT 1. Properly apply the brakes on the trailer and insert block beneath the tires to ensure that it does not move. Then fix the ramps in line with the centers of the trailer and the machine. Be sure that the two sides are at the same level as one another. 2. Determine the direction of the ramps, then slowly load or unload the machine. 3. Load the machine correctly in the specified position on the trailer.

Distance between ramps 13.2 PRECAUTIONS FOR LOADING A WARNING When the edge of the blade protrudes beyond the trailer, angle the blade. After loading to the specified position, secure the machine as follows. 1. Lower the blade slowly. 2. Place the safety lock lever in the ON, locked, (downward) position. 3. Depress the brake and decelerator pedal and push down the lock lever to apply the brakes. 2-55