. SAFETY GENERAL PRECAUTIONS When leaving the machine, always lower the work equipment 2 - 9 KEEP MACHINE CLEAN If water gets into the electric al system, there is a hazard that it will cause malfunctions or misoperation. Do not use water or steam to wash the electrical system (sensors, c onnectors). ne nd he If inspection and maintenan ce is carried out when the machi is still dirty with mud or oil, there is a hazard that you will slip a fall, or that dirt or mud will get into your eyes. Always keep t machine clean. is still dirty with mud or oil, th ere is a hazard that you will slip a et into your eyes.
Always keep t INSIDE OPERATOR'S COMPAR TMENT s compartment, always remove all mud and oil from the soles of your shoes. When entering the operator' s compartment, always remove a ll mud and oil from the so If you operate the pedal with mud or oil affixed to your shoes, your foot may slip and this may cause a serious ying around the operator's compartment. the window glass. Suction pads act as a lens and may cause fire. es inside the operator's compartment when driving or operating the machine. objects such as flammable or explosive items into the operator's compartment. , your foot may slip and t his may cause a serious accident.
Do not leave parts or tools l Do not stick suction pads to the window glass. Suction pads act as a lens and may ca Do not use cellular telephon es inside the operator's compartment when driving or oper Never bring any dangerous objects such as flammable or ex plosive items into the ope ALWAYS APPLY LOCK WHEN LEAVING OPERATOR'S SEAT Before standing up from the operator's seat, lower the wo equipment completely to the ground, set work equipment lo lever (1) and parking brake lever (2) securely to the LOC position (L), then stop the engine. If you accidentally touch the levers when they are not locke there is a hazard that the machine may suddenly move a cause serious injury or property damage.
Before standing up from th equipment completely to th lever (1) and parking brak e lever (2) securely to the LOC gine. levers when they are not locke machine may suddenly move a erty damage. position (L), then stop the en If you accidentally touch the there is a hazard that the cause serious injury or prop et work equipment lock lever a he LOCK position, then stop t engine. Use the key to lock the key, take it with you, and