. OPERATION EXPLANATION OF COMPONENTS CAUTION MONITOR GROUP CAUTION (1) (2) Charge level caution lamp Maintenance caution lamp (3) Air cleaner clogging caution lamp CHARGE LEVEL CAUTION LAMP Lamp (1) indicates an abnormality in the charging system while the engine is running. If the monitor lamp flashes, check the V-belt tension. If any abnormality is found, see "OTHER TROUBLE (PAGE 3-185)". REMARK This monitor lamp lights when the starting switch is turned to ON immediately after the engine is started or immediately before the engine is stopped. It does not indicate a problem.
3 - 9 If these caution lamps flash, chec k and repair the appropriate l ocation as soon as possi NOTICE the machine on level ground and check the monitor lamps. Park the machine on level grou nd an d check the monitor lam Confirm that monito r lamps ligh t up a bout 2 seconds after th e starting switch is turne d to the ON position. If any monito r lamp does not light, conta ct your Ko matsu distributor to inspect a nd repair. These are items whi ch need t o be o bserved when the e ngine is running. If an y problem occurs, the item ne eding immediate repair is d isplayed. If the re is any problem, th e problem location on the caution lamp will