OPERATION Adjusting Seat Tilt 1. Front tilt ( ); Push lever (3) down to adjust the angle of the front of the seat. (4 stages). To raise the angle at the front of the seat, keep the lever pushed down and apply your weight to the rear of the seat. To lower the angle at the front of the seat, keep the lever pushed down and apply your weight to the front of the seat. 2. Rear tilt ( ); Pull lever (3) up to adjust the angle of the rear of the seat. (4 stages). To raise the angle at the rear of the seat, keep the lever pulled up and stand up slightly to remove your weight from the seat.
To lower the angle at the rear of the seat, keep the lever pulled up and apply your weight to the rear of the seat. 3. Seat height; It is possible to move the seat up or down by combining adjustments 1 and 2. After setting the forward tilt or rear tilt to the desired height, operate the opposite part to set the seat horizontal then secure in position. Amount of tilt . . . . . . . . . . . . . . . . . . . . . . . . Up 13 E , down 13 E Height adjustment . . . . . . . . . . . . . . . . . . . . . . . 60 mm (2.4 in) Adjusting Armrest Angle Armrest (4) can be made to spring up by hand ~ 90 E .
In addition, by turning the bottom (5) of the armrest by hand it is possible to make fine vertical adjustments of the armrest angle. Armrest adjustment angle . . . . . . . . . . . . . . . . . . . . . . . . . 25 E REMARK If the seat back is tipped to the front without raising the armrest, the armrest will rise automatically. 2-49