OPERATION 12.1.4 OPERATIONS AND CHECKS BEFORE STARTING ENGINE WARNING If the control lever is touched by accident, the work equipment or the machine may move suddenly. When leaving the operators compartment, always set the safety lock lever securely to the LOCK position. 1. Check that safety lock lever (1) is at the LOCK position. 2. Check the position of each lever. Set the control lever to the neutral position. When starting the engine, never touch the knob button. 3. Insert the key in starting switch (2), turn the key to the ON position, then carry out the following checks. The buzzer will sound for ~ 1 sec, and the following monitors and gauges will light up for ~ 3 sec.
If the monitors or gauges do not light up or the buzzer does not sound, there is probably a broken bulb or disconnection in the monitor wiring, so contact your distributor for repairs. 2-52 3 Radiator coolant level 8 Engine coolant temperature 13 Air cleaner clogging 4 Engine oil level 9 Engine oil pressure 14 Swing lock lamp 5 Hydraulic oil level 10 Engine coolant temperature 15 Replacement of engine oil 6 Charge level 11 Fuel gauge Engine preheat light 7 Fuel level 12