OPERATION 12.2.2 STARTING IN COLD WEATHER WARNING ! Check that there are no persons or any obstacles in the surrounding area, then sound the horn as an alert and start the engine. ! Never use starting aid fluids as they may cause explosions. NOTICE Do not keep the starting motor rotating continuously for more than 20 seconds. If the engine will not start, wait for at least 2 minutes before trying to start the engine again. 1. Set fuel control dial at 3 notches from the low idle (MIN) position. REMARK There are 10 notches for the dial rotation, and the click can be felt by hand. 2. Hold the key in starting switch (2) at the HEAT position, and check that preheat monitor (3) lights up.
After about 30 seconds, preheat monitor will flash for about 10 seconds to indicate that preheat is finished. REMARK The monitor and gauge also light up when the key is at the HEAT position, but this does not indicate any abnormality. 2-55