OPERATION 12.10 HANDLING WORKING MODE 12.10.1 WORKING MODE The mode selector switch can be used to switch the mode to match the operating conditions and purpose, thereby enabling work to be carried out efficiently. Make effective use of each mode as follows. When the starting switch is turned ON, the working mode is automatically set to general operation mode (G.O), so normal operations can be carried out without setting the mode. Use the working mode switch to set the mode to the most efficient mode to match the type of work. NOTICE Do not use the heavy-duty operation mode for breaker operations.
If breaker operations are carried out in the heavy duty operation mode, there is danger that the hydraulic equipment may be damaged or broken. 2-74 ID Working mode Applicable operation Power max. Swift slow down Power Set pressure Speed Set pressure H/O Heavy duty operation Large volume digging and loading in a short time 5% up 9% up 40% down 9% up G/O General operation Normal digging and loading operations 23% up 9% up 30% down 9% up F/O Finishing operation Leveling or hauling operations - - L/O Lifting operation Aligning position - - B/O Breaker operation Breaker operations - -