Komatsu — 12.11.3 OPERATE CYLINDERS TO END OF STROKE

OPERATION 12.11 PROHIBITED OPERATIONS WARNING ! If it is necessary to operate the work equipment control lever when the machine is traveling, first stop the machine before operating the work equipment control lever. ! If the lever is moved inside the deceleration range, the engine speed will suddenly rise. Operate the levers carefully. ! Never operate the machine on a rock bed (hard or soft rock). 12.11.1 USING SWING FORCE Do not use the swing force to compact soil or break earth mounds or walls. When swinging, do not dig the bucket teeth into the soil. These operations will damage the work equipment.

12.11.2 USING TRAVEL FORCE Do not leave the bucket dug into the ground and use the travel force to excavate. This will bring excessive force to bear on the machine and the work equipment. 12.11.3 OPERATE CYLINDERS TO END OF STROKE If the cylinder is operated to the end of its stroke during operations, the ensuing force will be brought to bear on the stopper inside the cylinder, and this will reduce the life of the machine. To prevent this, always leave a small safety margin when operating the cylinders. 2-76