SAFETY WARNING: For reasons of safety, always follow these safety precautions. 8.2 DURING MAINTENANCE Only authorized personnel can enter the area during the maintenance operation. If necessary, have a guard supervise the area. Extra precaution should be used when grinding, welding, and using a sledge hammer. ! Before starting removal and installation of attachments, decide the team leader. ! Do not allow anyone except the authorized workers close to the machine or attachment. ! Place attachments that have been removed from the machine in a safe place so that they do not fall. Put up a fence around the attachments and take other measures to prevent unauthorized persons from entering. !
Stop the machine on firm, flat ground and lower the work equipment to the ground. ! Always block the track shoes of the machine securely. ! It is extremely dangerous to work with the track shoes jacked up from the ground using the work equipment. Never work with the machine raised in this way. If the surrounding noise is loud it may cause hearing problems or even loss of hearing. ! When carrying out maintenance of the engine or other operations with long exposure to noise, wear ear muffs or ear plugs. ! When carrying out maintenance operations on the machine, keep the area around your feet clean and tidy to prevent you from falling. Always do as follows. " Do not spill oil or grease.
Do not leave tools lying about. " Watch your step when walking. ! Never jump down from the machine. When getting on or off the machine, use the steps and handrails, and maintain three-point contact (both feet and one hand or both hands and one foot) to support yourself securely. ! If the job requires it, wear protective clothing. ! To prevent injury from slipping or falling, when working on the hood or covers, never use any part except the inspection passage fitted with non-slip pads. 1-28 PERSONNEL REMOVAL, INSTALLATION AND STORAGE OF ATTACHMENTS WORK UNDER THE MACHINE NOISE WHEN WORKING ON MACHINE