OPERATION A. MONITOR LIGHT GROUP The monitor light group is divided into three sets of items as listed following. Basic Check Items This displays the basic items that should be checked before starting the engine. If there is any abnormality, the appropriate monitor lamp will flash. REMARK When carrying out checks before starting, do not simply rely on the monitor. Always refer to the periodic maintenance items; see 12 OPERATION on page 2-43. to carry out checks. Caution Items WARNING If these monitor items flash, check and repair the location as soon as possible. These are items which need to be observed while the engine is running.
If any abnormality occurs, items which need to be repaired as soon as possible are displayed. If there is any abnormality, the appropriate monitor lamp will flash to indicate the location of the abnormality. Emergency Stop Items WARNING If any monitor lamp flashes, stop the engine or run it at low idle, and take the following action. These are items which need to be observed while the engine is running. If any abnormality occurs, items which need to be repaired immediately are displayed. B. METER GROUP This portion consists of preheat monitor, swing lock monitor, engine water temperature gauge, fuel gauge, service meter and display. C.
SWITCH GROUP This selects working mode, travel speed and time setting of clock. 2-6