OPERATION 11.18 FUSIBLE LINK If the starting motor will not rotate when the starting switch is turned ON, a possible cause is disconnection of wire type fusible link. Inspect the fusible link in battery box cover at right side of machine and, if necessary, replace it. REMARK A fusible link refers to the large size fuse wiring installed in the high current flow portion of the circuit to protect the electrical components and wiring from burning, similarly to an ordinary fuse. 11.19 CONTROLLERS A pump controller and electronic governor controller are provided. NOTICE Never splash or spill water, mud or drink over the controllers as this may cause a fault.
If a fault occurs in the controller, do not attempt repair, but consult your distributor. 11.20 TOOL BOX This is used for storing the tools. 11.21 GREASE GUN HOLDER This is inside the left rear door of the machine. Fit the grease gun to the holder when it is not being used. 2-41