Doosan DL06 — Doosan DL06 User Manual

3.3.23. Fuel high pressure pump z Assemble the gear of the fuel high pressure pump by using specified tool. Driving gear Fuel high pressure pump z Fill 60cc fuel at the fuel inlet before reassemble. z Install the fuel high pressure pump on the backside of the fly wheel housing. z Assemble the fixing bolts according to the sequence of assemble with specified torque. 3.3.24. Common rail & high pressure pipe z z DL06 Diesel Engine Disassembly and Reassembly of Major Components 112 Gear nut torque 11±0.5 kg.m Flange fixing bolt 4.4±0.5 kg.m Torque Hollow screw 3.0+0.5 kg.m Nipple 4.4+0.5 kg.m Assemble the common rail on the cylinder block.

Install the fuel high pressure pipe between the common rail and the fuel high pressure connector, then tighten the cylinder by cylinder with specified torque. Torque Fuel high pressure pipe Si de of common rail 2.5+0.5 Side of fuel high pressure connector 2.8+0.5 Common rail from fuel high pressure pump 2.1+0.5 Common rail and fixing bolt 2.2+0.5