3.3.27. Turbo charger z Fit a new gasket over the stud bolts of the exhaust manifold before tightening those turbocharger fixing nuts. Torque Turbo fixing nut 8.0+1.0 kg.m Hose clamp 0.5 kg.m z Install the oil supply pipe and return pipe. z Tighten the clamps of rubber hose that is connected air pipe to the turbocharger. 3.3.28. Cylinder head cover z Attach a new gasket on the Cylinder head cover Cylinder head intermediate cover cylinder head cover, assemble the cylinder head intermediate cover to the cylinder head, tighten the fixing bolts to the specified torque. Torque Head cover 2.2+0.5 kg.m Intermediate cover 3.1+0.5 kg.m z Fit the oil filler cap on the cylinder head cover.
DL06 Diesel Engine Disassembly and Reassembly of Major Components 114