Doosan DL06 — Doosan DL06 User Manual

3.6.3.

Engine fault code and occurring condition DL06 Diesel Engine Disassembly and Reassembly of Major Components 147 Fault code Contents of trouble Lamp Condition of occurring 1.1 Relation to coolant temperature sensor is abnormal C * Sensor / harness is abnormal * Coolant temperature is too high 1.2 Relation to fuel temperature sensor is abnormal C * Sensor / harness is abnormal * Fuel temperature is too high 1.3 Relation to boost air temperature sensor is abnormal C * Sensor / harness is abnormal * Intake temperature is excessive after intercooler * Engine / turbocharger / intercooler is abnormal 1.4 Relation to boost air pressure sensor is abnormal C * Sensor / harness is abnormal * Intake pressure is excessive after intercooler * Engine / turbocharger / intercooler is abnormal 1.5 Ambient air temperature sensor is abnormal N * Not use * Sensor / harness is abnormal 1.6 Ambient air pressure sensor is abnormal C *Ambient air pressure sensor attached to ECU is abnormal ECU 1.7 Relation to oil temperature sensor is abnormal N * Sensor / harness is abnormal * Oil temperature is too high 1.8 Relation to oil pressure sensor is abnormal C * Sensor/harness is abnormal * Oil pressure is abnormal (Leakage etc.) 1.9 Multiple state switch is abnormal C * Switch abnormal - SRC upper limitation - SRC lower limitation 2.1 Battery voltage is abnormal C * Battery / alternator / ECU is abnormal 2.2 Relation to fuel pressure sensor is abnormal B * Sensor / harness is abnormal 2.3 Relation to accelerator pedal is abnormal B * Accelerator pedal sensor / switch / harness is abnormal 2.4 Relation to accelerator pedal is abnormal C * Accelerator pedal error related on service brake switch fail.

* Not use for Industrial vehicles * Service brake & accelerator pedal switch / harness is abnormal 2.5 Vehicle speed is abnormal C * Not use for industrial vehicles * Vehicle speed sensor, tachometer or harness is abnormal 2.6 Air mass sensor is abnormal N * Not use 2.7 Clutch pedal switch is abnormal C * Not use for industrial vehicles * Clutch pedal switch / harness is abnormal 2.8 Service brake switch is abnormal C * Not use for industrial vehicles * Foot brake switch / harness is abnormal 2.9 Relation to cruise control switch is abnormal N * Switch or harness is abnormal 3.1 Monitoring of wear damage of the injection system N * Not use 3.2 Common rail pressure excessive fluctuation B * Common rail pressure is abnormal 3.3 Boost pressure regulation is abnormal N * Not use 3.4 Exhaust gas regulation is abnormal N * Not use 3.5 Transmission control is abnormal N * Auto transmission control unit message error 3.6 Automatic traction control is abnormal N * Not use for Industrial vehicles * Auto traction control unit message error 3.7 CAN-B line is abnormal C * Transmit and receive message communicating line thru CAN (ASR, Auto transmission, etc) - CAN bus off - SRC low or DPRAM error - No signal or error passive time 3.8 Warning which engine speed is excessive C * Engine over-speed 3.9 Main relay is short on circuit to ground B * ECU inner main relay is abnormal * Power supplying is abnormal * When the main relay is shorted to ground, depending on whether the main relay is 1,2 or 3