Doosan DL06 — Doosan DL06 User Manual

3.7. Operating condition of the ECU 3.7.1. Engine starting z Setting of a basic temperature for decision of the fuel quantity. Set to a basic temperature the minimum value between coolant temperature and fuel temperature and intake air temperature. z Engine speed sensor signal measurement - Using by crankshaft speed sensor. - Using by camshaft speed sensor. - Supply to the engine after decided properly fuel quantity to starting the engine. 3.7.2. Vehicle running z Essential dater for the running of the vehicle. - Accelerator pedal position signal - Engine speed - Vehicle speed 3.7.3. Engine idle adjusting z Adjusting of engine’s idle speed by the necessity of the driver.

z Method of the adjusting is possible by using the cruise control switch. z Preparing condition for the adjusting of the idle speed - Cruise control switch : no trouble - Pedal brake : no trouble - Vehicle speed : stop - Coolant temperature : more than limit - Engine speed : less than limited scope of the speed z Adjusting method of the idle speed - When the brake pedal is depressed. - After the cruise [RESUME] switch is depressed for one minute. ѓ Engine speed increase : cruise control [SET/INC] switch is depressed. ѓ Engine speed decrease: cruise control [SET/DEC] switch is depressed.

z Storage of the variable of the idle speed - Cruise control [RESUME] switch is depressed after variation of the speed. - When the switch [RESUME] is stored at the condition of depressing, the last stored value keep constantly after start the engine. - When the engine is stopped at the condition of doing not depressed [RESUME] switch, return to the first value. DL06 Diesel Engine Disassembly and Reassembly of Major Components 152