Doosan DL06 — Doosan DL06 User Manual

z Full disabled condition - State of vehicle speed sensor : occurrence of trouble - Vehicle speed : running - Engine speed : change of speed more than idle speed - Parking brake : disabled z Temporarily disabled method - Pedal brake is depressed, clutch pedal is depressed, or accelerator pedal is depressed. 3.7.7. Limp home function z The limp home is a function which the vehicle can be operated to the maintenance shop with minimum condition for traveling on the condition of taking safety when the defect code is occurred. z Application condition - Accelerator pedal is trouble : The vehicle is operated by constant engine speed no relation to depressing of the accelerator pedal.

- Sensor is trouble : The vehicle is operated with constant transfer value when the trouble of all kinds sensors is occurred. - Fuel quantity is limited : The fuel quantity supplied into the engine is limited according to kind of the defect. (is applied by division into 4 stages) - Diagnostic information output lamp : The safety driving is leaded to the driver by proposal of information about status of occurred faults. 3.7.8. Diagnostic z Diagnostic information output lamp (CEL: Check engine lamp) is operated when the trouble is occurred. z Operation of CEL and level of importance of faults - Defect of slight level : lamp is not lighted.

ѕ No influence on performance - Defect of middle level : lamp is lighted continuously. ѕ Little influence on performance, but the check is needed. - Defect of serious level : lamp is blinked. ѕ Engine power is dropped ѕ Engine power is not dropped, but the check is needed unavoidably after low speed operating. DL06 Diesel Engine Disassembly and Reassembly of Major Components 154