Doosan DL06 — Doosan DL06 User Manual

4.6.4. Oil exchange procedure While the oil is still hot, exchange oil as follows. z Take out the oil level gauge. z Remove the drain plug from oil pan, then drain out the engine oil into a container. Drain plug z Refill with new engine oil at the oil Oil filler cap filler neck on the head cover and the lubricating oil in accordance with the oil capacity of the engine through oil filler. z Be careful about the mixing of dust or contaminator during the supplement of oil. Then confirm that oil level gauge indicates the vicinity of its maximum level. z For a few minutes, operate the engine at idling in order to circulate oil through lubrication system. z Thereafter shut down the engine.

After waiting for about 10 minutes measure the quantity of oil and refill the additional oil if necessary. 4.6.5. Replacement of oil filter cartridge z At the same times of oil exchanges, replace the oil filter cartridge. Oil filter and cartridge DL06 Diesel Engine Commissioning and Operation 164