2.5. Engine Inspection 2.5.1. Stopping engine After checking the engine for any unusual condition at the idling speed, then turn the key switch to stop the engine. 2.5.2. General engine inspection cycle for industrial О : Check & adjust : Replace * ( The engine oil change interval is determined by engine use and oil grade.
DL06 Diesel Engine Technical Information 52 Inspection Daily Inspection time (Hr) Remark 50 250 500 Cooling system Check for leakage (hoses, clamp) О Check the water level О Check the V-belt tension О Change the coolant water ● (1,200Hr) Lubrication system Check for leakage О Check the oil level gauge О Change the lubricating oil ● 1st ● ( ) Replace the oil filter cartridge ● 1st ● ( ) Intake & Exhaust System Check the leakage for intercooler (hoses, clamp) О Clean and change the air cleaner element О Fuel system Drain the water in separator О Clean the fuel strainer of fuel feed pump О Check the fuel line leakage О Check fuel injection timing When necessary Replace the fuel filter cartridge ● Check the injector nozzles When necessary Engine adjust Check the exhaust gas state О Check the battery charging О Check the compression pressure When necessary Adjust intake / exhaust valve clearance О When necessary