3.1.24. Cylinder head z Remove the cylinder head bolts in the reverse order of tightening but Head bolt Torque wench remove it step by step. 1) First step : Loosen 1 ~ 2 threads 2) Second step : Remove by loosening fully. z Remove the total bolts simultaneously by the step of 1) and 2). Lay the removed bolts orderly not to damage the threads at all and store. z Prevent a collision between the bolt thread each other. z Take out the cylinder head gasket and scrap it. z Remove the foreign residues from the cylinder head surface and block surface. z Try not to make any damage on the contact surfaces. 3.1.25.
Electric control unit z Remove the electric control unit fixing bolts, then take off the electric control unit and bracket. 3.1.26. Starting motor z Unscrew the starter fixing nuts and remove the starter being careful not to damage its gears. DL06 Diesel Engine Disassembly and Reassembly of Major Components 63