98 OPERATION To activate the PowerLeash+ ™Engine Brake, utilize the following dash switches: Control Switch: The left most switch is the PowerLeash+ ON-OFF or control switch. Depress the engine brake icon to illuminate the switch and activate the PowerLeash+ engine brake functions. Once the PowerLeash+ activates the PowerLeash Speed +... screen displays in the Co-Pilot®. Note: The PowerLeash+ will not operate if the control switch is in the OFF position. Note: An exception exists if the vehicle is equipped with a Bendix Active Cruise Control & Collision Warning system.
If the vehicle is equipped with these features the Bendix system assumes all fueling and braking control when in active cruise control mode. Mode Switch: The PowerLeash+ Mode switch is used to select the type of engine brake operation needed. The individual switch functions are as follows: Latch Mode: Pressing LATCH activates the LATCH mode. In this mode the engine brake activates whenever zero (0) pedal is applied. The LATCH mode will only function with the cruise control disabled. Typically this mode is used to activate the brake every time the throttle pedal is released. The PowerLeash+ setting is automatically set at 100% in LATCH mode. Auto Mode:
This is the normal and recommended mDRIVE driving mode for PowerLeash+. The Auto mode can be used whether the vehicle is equipped with or without cruise control. If the cruise control is engaged, Mack’s Cruise ’n Brake feature will activate. If the cruise control is not engaged, the engine brake activation will depend on the switch’s SET - setting. Anytime the Mode switch is in the center position, PowerLeash+ is in Auto mode. Auto mode allows the driver to control the vehicle’s downhill speed. The vehicle speed is controlled without the need to manually adjust the braking effort or apply the service brakes.