108 OPERATION On Slippery Road Surfaces As with many aspects of operating a heavy-duty vehicle, special care should be taken when using the MACK PowerLeash™Engine Brake on slippery road surfaces. The potential for unpredictable loss of vehicle traction is a serious concern; in some situations the engine should not be used at all. As always, approach untested driving conditions with caution. Avoid use of the MACK PowerLeash™Engine Brake in these situations until you have gained some experience under normal driving conditions. As a rule, make sure that the vehicle is demonstrating good tractability with the engine brake off before checking for tractability with the engine brake enabled.
Then, provided traffic conditions are safe for "testing" tractability, switch the MACK PowerLeash™Engine Brake to the LOW position. If the vehicle shows any signs of loss of control (ABS activation or vehicle swerving, for example), immediately switch the engine brake back to the OFF position. C0032891 Only if the vehicle demonstrates good control in the LOW position (again, only in safe driving conditions) should you test in the HIGH position, if desired. Return to the LOW position and proceed with caution if there is any sign of loss vehicle control. Note:
Always monitor vehicle tractability in slippery road conditions, and make adjustments to engine brake switch position and vehicle speed as necessary. Always test the LOW power position setting before moving to the HIGH position. CAUTION Do not enable the MACK PowerLeash™ Engine Brake during bobtail operations, or when operating on slippery roads with an empty or lightly loaded trailer.