154 OPERATION Rear Case, Side-Mounted PTO Operating Procedures (T318, T318L and T318LR) When engaging the PTO — 1 Select LO-split using the splitter switch and select LO range using the range selector. Note: The transmission MUST be in LO range and LO-split at all times during PTO operation. 2 Depress the clutch pedal to disengage the clutch. 3 Set the parking brakes. 4 Move the main box shift lever to the NEUTRAL position. 5 Move the dash-mounted compound NEUTRAL control valve to the ON position, which moves the synchro clutch to a NEUTRAL position. 6 Engage the PTO. 7 Move the main box shift lever to the desired ratio. 8 Release the clutch pedal to engage the clutch.
9 Operate the PTO-driven load. When disengaging the PTO — 1 Depress the clutch pedal to disengage the clutch. 2 Move the main box shift lever to NEUTRAL. 3 Disengage the PTO. 4 Move the dash-mounted compound NEUTRAL control valve to the OFF position, which moves the synchro clutch back to LO range. 5 Move the shift lever to the desired main gear box ratio. 6 Release the parking brakes. 7 Release the clutch pedal to engage the clutch.