178 Mack, Emissions Solution Urea System Fault Messages Urea System Fault screens appear when a low voltage or charger/battery issue for the Urea components has been detected by the V-MAC system. The two screens that appear are Urea System Low Voltage and Urea System Fault Check CHARGER/BATTERY . The Urea System Low Voltage screen displays if the urea system is receiving low voltage. Low voltage can inhibit the proper function of the urea system. The Urea System Fault Check CHARGER/BATTERY screen displays if there is a fault with the urea system battery or charger. A battery or charger issue can adversely affect the Urea system’s operation.
Also, the Electronic Malfunction Indicator lamp illuminates up in the Instrument Cluster for both these fault messages.. The driver should acknowledge this message by pressing the Enter ( ) button. Contact a certified Mack Dealer immediately concerning this fault messages. If the fault is not addressed, then the Urea system will malfunction, causing additional error codes. Eventually the system malfunction will cause the vehicle to derate until the proper service is performed to address the malfunction. Note:
For vehicles equipped with MACK MP8 engines with SCR Aftertreatment System, the dosing unit is powered by a separate 24 Volt source comprising of 2 small maintenance free batteries and a 12–24 volt converter. Note: For sleeper cab, these are located in cab tool box. Note: For day cab, these are located in battery box.