Mack Trucks — Mack RH Drive Australia 21630923 Manual

202 MAINTENANCE AND LUBRICATION Coolant Level Check The MACK® chassis has a pressurized plastic coolant expansion tank where quick checks of coolant level can be made and additional coolant can be added to the system. The expansion tank is mounted on the radiator. Periodically, the coolant level should be checked by observing the coolant in the expansion tank. C0032903 Draining the Cooling System Whenever repairs are to be made which would require disconnection of coolant hoses, etc., the cooling system should be drained. Carefully remove the filler cap and open all coolant drain cocks. Refilling the Cooling System Close all drain cocks and fill only with the proper VCS coolant mixture.

Run engine with the pressure cap removed until operating temperature is reached and the thermostat opens. Recheck level and add coolant if required. Run the engine long enough to be sure the system is free of air and has the correct amount of coolant. WARNING Turn the cooling system pressure cap counterclockwise slowly. After the pressure has completely dissipated, continue turning to remove the cap.