MAINTENANCE AND LUBRICATION 207 Inspection Inspect your tyres daily. Look for bulges, cracks, cuts, penetrations and/or oil contamination. If any such damage is found, the tyre must be thoroughly inspected by a qualified tyre inspector and repaired or discarded immediately, at his discretion. Also, check for uneven wear. If found, a thorough inspection of front end parts and alignment should be made by a qualified mechanic. Refer to the Maintenance and Lubrication Manual for more information. Tyre Manufacturer’s Data Book Specific and more detailed information can be obtained by referring to the technical data books provided by each tyre manufacturer. Subjects of interest are:
High-speed or low-speed operation Repair, retreading and regrooving Use of tyre chains Mixing radial and bias tyres on the same vehicle Use of dynamometers Tyre mounting/dismounting CAUTION For important tyre information (i.e., high speed limits, inflation pressures, etc.), consult the product information available through the specific tyre manufacturer.