Mack Trucks — Mack RH Drive Australia 21630923 Manual

218 MAINTENANCE AND LUBRICATION Tachometer (RPM) Output This terminal is to be used for devices requiring information for engine speed signals. (See the Warning and Note above.) Note: The tachometer output and speedometer output are 50% duty cycle, Transistor-Transistor Logic (TTL) compatible, square wave signals that are calibrated to provide a standard pulse rate of 12 pulses per engine revolution for the tachometer output and 18,645 pulses per kilometer for the speedometer output. TTL compatibility of these outputs may be affected by other devices connected to these outputs. Speedometer (KPH) Output This terminal is to be used for devices requiring information for vehicle speed signals.

(See the Warning and Note below). SAE/ATA J1708 Posts (Serial Links A and B) This is a serial communication interface. It conforms to the SAE/ATA J1708 Recommended Practice for Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications. (See the Warning above.) WARNING The tachometer output, speedometer output, and serial links A and B are for specific hookups. These terminals should be used only for their specified purposes and connection to these terminals should be done only by a qualified service technician.