Mack Trucks — Mack RH Drive Australia 21630923 Manual

INSTRUMENTS AND CONTROLS 61 For information concerning trailer coupling and uncoupling, refer to the Operation section of this manual. CAUTION Be sure to deactivate the heavy mud/snow function when no longer needed. Continued operation with the heavy mud/snow function active will result in vehicle damage. If after a reasonable amount of time (no more than five minutes) the vehicle is still not passive, deactivate the ATC and put on chains. Automatic Traction Control Switch/Heavy Mud/Snow – Activate for increased traction control in heavy mud or snow.

(See “Automatic Traction Control (ATC) (If Equipped)”, page 125 in the Operation section of this manual for more details.) When the operator presses the top of the rocker switch, the heavy mud/snow function ATC indicator lamp blinks continuously. The ATC lamp stops blinking when the ATC mode switch is pressed again or ignition key cycled. Engine Brake Switch – Used to activate the engine brake. Refer to the Operation section in this handbook for more information. Load Light Switch – Press top of the switch in to turn light on. Press bottom of switch to turn light off. Mirror Defrost – Push the top in to activate mirror defrost.

Motorized-Mirror Joy Stick – This control is designed like a "joy stick." ROTATE the stick to the right to control the right mirror. ROTATE the stick to the left to control the left mirror. PUSH the stick up, down, left or right, as indicated, to correctly position the selected mirror. C0029215 Power Divider Lockout Switch See "Inter-Axle Power Divider Lockout (If Equipped)" in the Operation section of this manual.