OPERATION 89 Battery Replacement Under normal use, the transmitter battery should last approximately two years. When battery replacement becomes necessary, use a Panasonic® 3 volt, type CR2032, or equivalent. Replace the battery as follows: 1. Open the transmitter by inserting a dime between the two halves of the transmitter case (near the key ring hole) and twisting. C0032882 2. Remove the battery. 3. Install a new battery with the positive (+) side down. C0032883 1. Battery, positive (+) side down 4. Align the transmitter case halves, then snap the case together. 5. Check the operation of the transmitter.