Mack Trucks — Mack RH Drive Australia 21630923 Manual

OPERATION 91 Feature Programming: 1 Turn the ignition switch to the ON position. 2 Access the keyless entry module, located behind the D-Panel. 3 Push the Program switch on the keyless entry module six times. The horn will chirp six times, and the program LED on the module will be solid, to indicate you are now in the Feature Programming Mode. 4 Press and release the transmitter button corresponding to the feature you want to change. 5 Press the transmitter button again to change the feature again. Keep pressing the transmitter button until the module advances to your desired setting. Note: The horn chirps and LED pulses will indicate the new setting. 6.

To exit Programming Mode, turn the Ignition to the "Off" position, or simply wait for 15 seconds. The horn will respond with a short + long beep and the LED turns off to confirm exit. Press Transmitter Button One Chirp/LED One Pulse Factory Default Setting Two Chirps/LED Two Pulses The Remote function can operate with ignition "on" The Remote function cannot operate with ignition "on" Automatic Re-Arm OFF Automatic Re-Arm ON AUX External Light turns on for 3 minutes External Light turns on for 5 minutes Three Chirps/LED Three pulses = External Light turns on for 10 minutes. Four Chirps/LED Four pulses = External Light turns on for 15 minutes.

Five Chirps/LED Five pulses = External Light turns on for 20 minutes.