RAM 2500/3500 — Automatic Operation

GETTING TO KNOW YOUR VEHICLE 61 Temperature Control Panel Mode conditions that require extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield. A UTOMATIC T EMPERATURE C ONTROL (ATC) Temperature Control regulates the temperature of the air forced through the climate system. Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.

There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from these outlets. Bi-Level Mode The temperature increases as you turn the temperature control knob clockwise. 2 The temperature decreases as you turn the temperature control knob counterclockwise. Blower Control Automatic Operation 1. Push the AUTO button on the faceplate, or the AUTO button on the touchscreen on the Automatic Temperature Control (ATC) Panel. Blower Control regulates the amount of air forced through the climate control system. There are seven blower speeds available. The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting.

The blower speed decreases as you turn the blower control knob counterclockwise. Mode Control Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and passenger temperature control buttons. Once the desired temperature is displayed, the system will achieve and automatically maintain that comfort level. NOTE: Bi-Level mode is designed under comfort condi- tions to provide cooler air out of the panel outlets and warmer air from the floor outlets. Floor Mode 3.

When the system is set up for your comfort level, it is not necessary to change the settings. You will experience the greatest efficiency by simply allowing the system to function automatically. Turn the mode control knob to adjust airflow distribution. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets. Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode NOTE: It is not necessary to move the temperature settings for cold or hot vehicles.

The system automatically adjusts the temperature, mode, and blower speed to provide comfort as quickly as possible. Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy