RAM 2500/3500 — Cargo Camera — If Equipped

GETTING TO KNOW YOUR VEHICLE 81 PICKUP BOX above the wheel housings and in the bulkhead dividers to form the floor. There are stampings in the sheet metal on the inner side bulkheads of the box in front of and behind both wheel housings. Place wooden boards across the box from side to side to create separate load compartments in the pickup box. The pickup box has many features designed for utility and convenience. The pickup box is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts. WARNING! There are four tie-down cleats bolted to the lower sides of the pickup box that can sustain loads up to 1000 lb (450 kg) total.

C ARGO C AMERA — I F E QUIPPED 2 Care should always be exercised when oper- ating a vehicle with unrestrained cargo. Vehicle speeds may need to be reduced. Severe turns or rough roads may cause shifting or bouncing of the cargo that may result in vehicle damage. If wide building materials are to be frequently carried, the installation of a support is recommended. This will restrain the cargo and transfer the load to the pickup box floor. Your vehicle may be equipped with the Cargo Camera that allows you to see an image of the inside of the pickup box. The image will be displayed in the Uconnect screen.

Pick Up Box Features The Cargo Camera is located in the bottom center area of the Center High Mounted Stop Lamp (CHMSL). 1 — Cleats 2 — Upper Load Floor Indents 3 — Bulk Head Dividers 4 — Anchors If you wish to carry more than 600 lb (272 kg) of material suspended above the wheelhouse, supports must be installed to transfer the weight of the load to the pickup box floor or vehicle damage may result. The use of proper supports will permit loading up to the rated payload. A touchscreen button to indicate the current active camera image being displayed is made available whenever the Cargo Camera image is displayed. NOTE:

If you are installing a Toolbox, Ladder Rack or Headache Rack at the front of the Pickup Box, you must use Mopar® Box Reinforcement Brackets that are available from an authorized dealer. You can carry wide building materials (sheets of plywood, etc.) by building a raised load floor. Place lumber across the box in the indentations provided A touchscreen button to switch the display to rear view camera image is made available whenever the Cargo Camera image is displayed. Unrestrained cargo may be thrown forward in an accident causing serious or fatal injury. A touchscreen button "X" to disable display of the camera image is made available when the vehicle is not in REVERSE gear.