RAM 2500/3500 — Storage Position

GETTING TO KNOW YOUR VEHICLE 87 B ED D IVIDER — I F E QUIPPED 1 — Center Handle Lock 2 — Handle 3 — Unlocked Position 4 — Locked Position The bed divider has two functional positions: Divider Position Storage Position Divider Position 2. With the side gates open, position the divider so the outboard ends align with the intended slots in the sides of the bed. 2 The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed. There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo. Side Gates Closed To install the bed divider into a divider position, perform the following: 5.

Lock the center handle to secure the panel into place. 1. Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the divider side gates. Storage Position The storage position for the bed divider is at the front of the truck bed which maximizes the bed cargo area when not in use. To install the bed divider into the storage position, perform the same steps as you would for the divider position, except position the divider fully forward in the bed against the front panel. Aligning Gate To Slots 3. Rotate the side gates closed so that the outboard ends are secured into the intended slots of the bed. 4.

Rotate the center handle horizontally to secure the side gates in the closed position. Center Handle And Lock