Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE SECONDARY MATERIALS FOR OPERATION 4 - 12 FUEL After completing the day's operation s, fill the fuel tank to force out any air containin g moisture. Thi s will prevent the moisture from condensing and mixing with the fuel. ent, and if fuel containing water or dirt is used, it cannot work properly. rities get in when storing or adding fuel. e temperature in the Operation and Maintenance Manual.

The fuel pump is a precision instrum ent, and if fuel containing water or dirt is used, it cannot work Be extremely careful not to let impu Always use the fuel specified for th e temperature in the Operation and Maintenanc If the fuel is used at temperatures °C (5°F), the fuel will solidify. If the fuel is used at temperature result in problems such as a dro If the fuel is used at temperatures lower than the specified temperature (particular ly at temperatur es below -15 If the fuel is used at temperature s higher than the specified temperature, the visc osity will drop, and this may p in output.

Before starting the engine, or when 10 minutes have passed after adding fuel, drain t he sediment an d water from the fuel tank. If the engine runs out of fuel, or if th e filters have been replaced, it is necessary to b leed the air fro m the circuit. If there is any foreign material in the fuel tank, wash the tank and fuel system. Excess fuel in the tank may spill out due to thermal expansion when the fuel temper ature rises. Be careful not to fill with too much fuel. NOTICE Use only diesel fuel. The engine mounted on this machine emp loys electronic control and a high-pressure fuel injec tion device to ob tain good fuel consumption and good exhaust gas charac teristics.

For this reason, it requires high precision fo r the parts and go od lubrication. If kerosene or other fuel with low lubricatin g ability is used, there will be a big drop in durability. COOLANT AND WATER FOR DIL UTION ion of preventing corrosion as well as preventing freezing. not an issue, the use of antifreeze coolant is essential. h Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has The coolant has the important funct ion of preventing corrosion as well as preventin Even in the areas where freezing is not an issue, the use of antifreeze coolant is e Komatsu machines are supplied wit h Komatsu Supercoolant (AF-NAC).

Komatsu Supercoolant (A excellent anticorrosion, antifreeze a nd cooling propertiesand can be used continuou sly for 2 years or 4000 hours. As a basic rule, we do not recom mend the use of any coolant other than Komatsu genuine supercoolant ant, it may cause serious problems, such as corrosion of the engine and m. erve the precautions given in the Operation and Maintenance Manual. with distilled water, so it is not flammable. atsu genuine supercoolant (AF-NAC).

If you use another cool aluminum parts of the cooling syste When using antifreeze, always obs erve the precautions given in the Operation and Maintenance M The Supercoolant is already diluted with distilled water, so it is not flammable. With the Supercoolant (AF-NAC), th e density used for the coolant differs according to the ambient temperature. For details of the coolant density, s ee "CLEAN INSIDE OF COOLING SYSTEM (P AGE 4-30)". Even in areas where it is not consid ered necessary to prevent freezing, always use Supercoolant (A F-NAC) with a density of over 30% in order to pr event corrosion of the cooling system.

with distilled water that does not contain any ions or water-hardening coolant with ordinary water. engine to cool before adding coolant. Supercoolant (AF-NAC) is diluted substances. Never dilute the Super If the engine overheats, wait for the If the coolant level is low, it will caus e overheating, and will also cause problems with corrosion due t o air entering the coolant.