. MAINTENANCE SERVICE PROCEDURE WARNING so never pour it into run for another 5 4 - 31 Antifreeze is toxic. Whe n open the drain valve, be care ful not to get w ater containing antifreeze on yo flush your eyes with lar ge amount of fresh water and see a doctor at o When changing the coo lant or draining the coolant fro m the radiator b efore carrying out repairs, ask handle any coolant con taining antifreeze, or contact drainage water ditches or drain it onto the ground sur The Supercoolant is alre ady diluted with distilled w ater, so it is no t flammable. (For details of th "COOLANT AND WATE R FOR DILUTION (PAGE 4-12)".
Chec k the density with a coolant t Prepare a container tha t is a larger than the specif ied amount of coolant, then drain the coola Prepare a hose to use w hen filling with coolant. 1. Stop the engine and wait for the temperature o f the coolant t go down. ) slowly and remove it. ) at the bottom of the radiator and drai ooler and drain the water. 2. Turn radiator cap (1 3. Open drain valve (2 valve (3) of the oil c ooler and drain the water. 4. After draining the w ater, close drain valves (2) and (3), and fi with city water. 5. When the radiator is full, start the engine, and r un it at low idle Keep the engine ru nning at low idle for 10 m inutes until th 194°F).
, and drain th coolant temperature reaches more than 90°C ( 6. Stop the engine, op en drain valves (2) and (3) the water, close them. water. After draining 7. Add Supercoolant th rough the water filler up to the bottom of the filler port. ENSITY TABLE. at low idle for 5 minutes, th OFF.) For details of the Su percoolant density, see th e COOLANT D 8. To remove the air c ontained in the coolant, ru n the engine minutes at high idle. (When doing this, leave th e radiator cap 9. Stop the engine. Ab out 3 minutes later, supply the coolant u p to the coolant filter, then cl